27th February 2021
The act of welding Bozeman MT can bring hazardous situations. Learning to recognize these potential dangers is the best way to have a safe welding environment. Prior to starting any welding job, look out for these hazards to protect yourself!
Fire and Burn Hazards
When welding, you are exposing yourself to great amounts of heat and flames. Being aware of this and wearing the correct protective gear beforehand will help prevent any heat or flame related injury. The proper gloves, glothing, helmet and face protection will help prevent injury. Also, ensuring your clothing does not have any holes or damages prior to every use is very important.
Electric Shock
Welding puts you at risk of electric shock which can result in dangerous, life threatening injuries. Make sure not to weld in damp environments, wearing damp clothing or on metal flooring (highspeedtraining.co.uk). Making sure to check your welding leads or electric cables for damage is another great way to prevent injury from electric shock.
Noise Hazards
Welding exposes you to loud noises that can be damaging to your ears. Overexposure to this type of noise can cause permanent damage to your ears and hearing loss. Investing in the right type of earplugs or headgear can help prevent this.
Fumes and Gases
Overexposure to the fumes and gases that come with welding can also be damaging to one’s health. Exposure to these fumes and gases can cause lung cancer and issues with the respiratory system. Keeping your head away from the fumes and using a form of ventilation is the best way to combat this, (lincolnelectric.com). An exhaust system will remove fumes and gases from the area which you are working and prevent damages to your health.
Contact Iron Works Construction today to learn more about welding Bozeman MT, metal building installation Bozeman MT and steel building installers Bozeman MT.
27th December 2020
If you are just getting started with welding Bozeman MT, here are some essential items to get the job done safely and efficiently.
The proper welding helmet
The welding helmet you must use is an auto-darkening welding helmet (makemoneywelding.com). These types of welding helmets allow you to easily see what you are welding while staying safe. This will also help to prevent welding errors or frustration that could arise when you first begin to weld.
The right clothing
For your own well being and safety, certain clothing must be worn when welding. This includes a jacket and pants made of flame-resistant material. It is also advised to make sure you are wearing something that covers your head such as a hat to protect yourself. Welding gloves are also absolutely necessary to protect your hands when welding. Thicker gloves will give you more protection while thinner gloves can give you better precision at times.
Welding Clamps
You will need several welding clamps for any welding project. This is what will cause your welding to be secure, aligned and accurate!
Speed Square
A speed square is another necessary tool for any welding project. This tool helps with measuring your materials and ensuring you are working with the right angles or lines.
Fire extinguisher
Having a fire extinguisher handy when welding is very important for safety reasons. You are working with flames so it is a good idea to have an easy way to put out a fire if necessary. When welding there are lots of sparks and heat, which creates an environment where a fire could easily start. The best types of fire extinguishers for welding are usually combination extinguishers.
Contact Iron Works Construction today to talk to a professional or learn more about welding Bozeman MT, metal building installation Bozeman MT and steel building installers Bozeman MT.
27th October 2020
Welding Bozeman MT during the colder months can be a little more difficult than when it is warm out. Here are a few tips to find success when welding during the winter months.
Fix Comfort Issues
The cold winter weather has a great affect on our comfort levels and can make certain tasks more difficult. The task of welding takes a lot of concentration and the quality of your weld can be affected by how comfortable you are when welding. Welding is no easy activity and takes a great amount of focus and skill. During these months make your comfort a priority when welding to avoid injuries and create the best quality weld to your ability
Understand the Difficulties
Educating yourself on what difficulties could arise when welding in the colder months is very important. This will ultimately prevent any issues that may arise. For example, metal is more likely to warp in the colder months and welding can easily crack. This can cause bitterness and take up your time. A way of preventing this would be to preheat your metal before welding with your torch. This will reduce stress and warping on the weld.
The Best Projects
Before starting any welding project during the winter time, it could be beneficial to know which ones are best to complete. It is best to choose a job that does not take too many steps that the weather could affect (theengineblock.com). High speed cooling can lead to cracks and damages. You should also try to remove any condensation or moisture from your metals before welding. Body work and patch panels are some examples which should be done during warmer seasons.
To learn more about welding Bozeman MT, metal building installation Bozeman MT and steel building installers Bozeman MT, visit Iron Works Construction today!
27th August 2020
Welding Bozeman MT can be very dangerous if not done so properly and by a trailed professional. There are many things that could go wrong and health risks associated with any welding project. The following are reasons why professional welding is important.
Wearing the right clothing and gear
Any welding job should be done wearing the right clothing to protect oneself from injury or health risks. A helmet, goggles and gloves must be worn. Any exposed skin is not safe when welding which is why it is important to always wear protective and secure clothing.
Understand the equipment used
When welding, you should be educated on the tools and equipment that you are using. This will help prevent injury or any accidents. It will also help you identify problems that arise so you can fix them as soon as possible. There are more injuries that could be associated with welding than some may be aware of so being educated on the equipment you are using is crucial.
Know the dangers to watch for
Prior to welding anything it is crucial that you know the dangers that could come with it. The right electrical and fire safety measures should be taken into account before welding. It is also important to take the right oxygen precautions to protect your respiratory system when welding. Chemical and cylinder safety should also be taken into account to prevent injury, ishn.com.
Noise Hazards
One danger that may not be the first to come to mind when welding is noise hazards. When welding you will most likely encounter very loud noises. This can be damaging to the ears and cause long term effects. There are also many side effects such as vertigo and increased blood pressure that are associated with noise-induced hearing loss, highspeedtraining.co.uk.
For more information regarding welding Bozeman MT, metal building installation Bozeman MT and steel building installers Bozeman MT visit Iron Works Construction!
27th June 2020
For tips and tricks on welding Bozeman MT. Before you start welding practice holding the gun without actually using it. This will allow you to be comfortable prior to use. You can also change your positioning and welder settings to prepare for the welding. It is very important to do your research prior to setting up any equipment in order to prevent injury of mistakes when welding. If the welding process is done incorrectly, there could be errors such as pinholes. It is also important to become educated on the different methods of welding since no single method is the best for all applications. Make sure you are wearing the right equipment to protect yourself while welding. One should never look straight at a welding arc without a welding helmet and always handle equipment with heavy-duty welding gloves.
Once comfortable, prepare the piece of metal which you are welding by marking on it and degreasing it. You may also take this time to perfectly fit the metal pieces together at a 90 degree angle. Clamps are then used to ensure the metal pieces do not move from the desired position. When securing the metal pieces always check for edges that may be sticking out to ensure a smooth weld.
When it is time to finally weld your desired pieces make sure you do not over weld. The more metal that is deposited, the longer it will take to smooth off. In order to the the smoothest and flattest surface when welding, move your grinder along the weld, never across it. This will remove any extra marks. To finish your weld make sure to prime and paint the steel. At this point you may also smooth some clear wax over it or spray clear acrylic. The sooner you finish your weld the better. This will prevent any rust from forming.
Iron Works Construction specializes in metal building installation Bozeman MT and steel building installers Bozeman MT. Welding Bozeman MT measure to ensure that the job be done in a prompt, timely manner, and to every specification given within our assignment.
For more information regarding welding or iron works, contact Iron Works Construction.
27th May 2020
Erecting a metal building requires meticulous supply chain and logistics planning to ensure materials, people, and equipment are received on-time and staying on schedule. From welding Billings MT, to framing, to finishing touches, it is important to lay out the process from beginning to end and remain organized.
Step 1: Prepare the Building Site
Not preparing a building site properly can result in problems arising down the line in the project.
You need to clear the direct area that you will be building on, along with the area around it so that machines, tools, and supplies can access the site. You also have to ensure that the concrete foundation is fully cured before proceeding with the next step. Lastly, you need to make sure the roads leading up to the site are cleared and ready for large equipment, cars, and machines to make their way up and down safely.
Step 2: Begin the Framing Process
The framing process begins with the I-beams and H-beams. These are columns and rafters that run horizontally (I) and vertically (H). This is usually the heaviest part of the building process as these metal beams are pre-constructed and assembled on-site.
Step 3: Apply the Girts, Purlins, and Framed Openings
Girts, purlins, and framed openings give support to the rest of the site, as a secondary frame. Girts provide lateral support to the structure.
Step 4: Set Up the Roof and Walls
At this stage, the framing should be completed. The next steps are insulating, putting up sheeting, etc.
Step 5: Finish the Visual Design
The final part of the process is the visual design or aesthetic of the construction. Whatever visual elements were added to the order of this project, will get added in this step. Some examples are trims, accessories, doors, windows, and vents, to name a few.
Depending on the project, these steps may require some adjustments as each project has different needs. For more information on iron works Billings MT and metal buildings erector Billings MT, contact Iron Works Construction to speak with a specialist.
27th April 2020
Are you looking for a construction Billings MT company for your commercial project? Look no further, here at Iron Works Construction, we have over 10 years of experience in the construction industry. We have worked on small to large scale projects, for various types of buildings, creating exceptional quality work every time.
Iron Works Construction prides itself in every piece of work accomplished. Clients are at the heart of our business and service is always guaranteed with no exception in any instance. We are willing to go to any reasonable measure to ensure that the job is done in a prompt, timely manner, and to every specification given within our assignment.
Our services include:
- Metal Building Erectors
- Iron Works
- Iron & Steel Installation
- Welding
We know the importance of finding the perfect partner in your building project and we assure you that you will not be disappointed. We are a group of highly qualified specialists in the field. Each of us at Iron Works Construction bring our unique set of unique skills and expertise to every project, making us stronger as a whole.
It is all about the client here at Iron Works Construction. We are in business to serve you!
Covid-19 Update
With current stay at home orders in effect, non-essential business operations are at a standstill. In the state of Montana, construction is considered essential and we are able to still operate as usual. Most projects may experience delays due to the current situation, however, we are prepared to navigate accordingly.
For more information, call us today at 406-861-9920 or email us at ironworksconst@gmail.com.
Construction Billings, MT, Welding Montana, Welding Billings
27th February 2020
When looking for a metal erector company Billings MT, you want to make sure you are doing the proper research, not only online, but offline too, speaking with others in the industry and checking out projects, to get a good idea of what they can offer. There are many companies to pick from, but only a few will be the best fit for your project.
Here are some of the things to look out for when choosing a metal erector company.
Experience
When it comes to construction, experience is key. It will be easy to identify if your construction Billings MT or steel installation company isn’t prepared or qualified to do high quality work. The bigger the project, the more you will want to hire a company with experience.
Ask Questions
The more you ask, the more you will know. Make sure you are asking as many questions as you can to better understand what a company has to offer. Some of the questions you can ask are:
- How many framers will be available for the project?
- What experience do the framers have?
- How many jobs are you currently working on?
Get Multiple Bids
You want to get as many bids as possible. This will ensure you aren’t getting ripped off or overspending on a project and that you can feel confident and trustworthy in the company you hire. This will also give you a standard to go off of for when working on future projects.
Double Check
You want to verify everything. There is no room for error in steel installation and it starts with picking the company you want to hire. Some things you can do extra research to verify are:
- Check the Better Business Bureau for their rating.
- Ask others for their experience working with the company or check online reviews.
- If you can, visit one of their current or past projects to see their quality of work.
For more information on choosing a metal erector company, contact Iron Works Construction, a premier metal erector company in Billings, MT.
31st January 2019
4 Types of Welding Procedures
As the premier welding specialist Billings MT, we believe it’s important for our clients to know the basics of welding and the steps we take to provide the best iron installation in Billings Montana. While we don’t suggest trying to weld anything on your own, we want our clients to understand the process and techniques we use at Iron Works Construction. The 4 types of welding procedures we use for our projects as welding specialist Billings include:
- Shielded Metal Arc Welding: One of the first and most popular forms of welding, Shielded Metal Arc Welding uses the manual procedure of stick welding. Common in the industrial arena to mold iron and steel together, it works through an electric current, which forms an electric arc that joins the two metals together.
- Gas Metal Arc Welding: This process uses constant voltage while a shielding gas feeds through the welding gun. While fumes can be emitted during, the procedure is usually performed indoors.
- Flux Cored Arc Welding: Also known as FCAW, this semi-automatic process has a high production rate which is appealing to a welding specialist. Similar to Gas Metal Arc Welding, heat generates through the electric arc to fuse the metal together and is covered by a shielding gas to protect from the atmosphere.
- Gas Tungsten Arc Gas Welding: Mostly used to weld aluminum, magnesium, and copper alloys, this method provides greater control in the welding process although it’s a more difficult process to master.
For all things welding, contact Iron Works Construction at 406-861-9920.
28th November 2018
What Welding Specialist Billings MT Can Do For You
A job as a welding specialist Billings MT falls under the broader career category of Welders, Cutters, and Welder Fitters. These professionals use hand-welding or flame-cutting equipment to join metal parts in an effort to fill holes, indentations, or seams of fabricated metal products. Today, many companies are using lasers to weld parts together during the manufacturing stage of a product design. These corporation sector’s range from medical to automotive to aerospace. The following are the benefits of a welding specialist assisting you with your next laser welding project:
- Precision: Consulting a welding specialist Billings for your next Laser welding project will result in high levels of accuracy and control. This technology can be used to weld even the tiniest of parts together without causing any damage or further destruction in the process.
- Capability: Laser technology allows individuals to handle complicated joins of projects. The technology allows a professional to weld dissimilar materials as well as other areas that previously would have been to difficult to weld using traditional methods.
- Strength: The technology allows these manufacturers to have high strength welds. There is then no need for any filler material to bond parts. Lasers offer long-lasting weld quality which is clean processing and can withstand many conditions. Especially for the medical industry where safety is a top priority, Laser welding is at the forefront.
- Consistent: Manufacturers choose Lasers as their top choice for welding methods because it is easy to repeat the welds made. It is a sped up welding technique that is also way more versatile. That same Laser can be reused to cut and drill. Some Laser’s can even be reused for marking. The fact that Lasers allow for repeatability allows a business to make unit cost reductions and reallocate those funds.
- Low heat application: Lastly, welding technology uses low heat application. This minimizes the distortion of components involved. With this in mind, Laser welding is also ideal for luxury products such as jewelry. They use localized energy which results in contact-free application.
For more information regarding Laser welding or to get in touch with a Welding Specialist Billings MT – contact Iron Works today!
